|
Protect Your Investment.
There are approximately 40 million masonry chimneys in North
America and the most common problems with these structures is water
penetration. Water causes over 1 billion dollars in damage annually
in the form of staining, loss of insulation value, freeze-thaw
damage, deterioration, and ultimately structural failure. All new
and existing masonry chimneys are susceptible to water damage and,
even if repaired, chimneys will continue to deteriorate if they are
not protected.
As Portland Oregon's masonry contractors, we are experts in
chimney
and fireplace construction,
masonry
restoration, and chimney protection.
Water Damage Can Be Prevented
Chimneys are highly exposed to the elements and, if left
unprotected, are susceptible to structural deterioration. It is
important to address this problem before serious damage occurs.
Superior Technology
ChimneySaver® comes with a 10 year warranty and is the first
water repellent specifically developed to protect chimneys from the
severe weather conditions to which they are exposed. ChimneySaver is
a WATER REPELLENT - not a water sealer. The difference could save
you hundreds, or even thousands of dollars in repairs because
sealers can actually damage masonry. Unlike waterproofing sealers
that remain on the surface and trap water vapors, ChimneySaver
penetrates deep enough to protect masonry from destructive water
penetration.
ChimneySaver contains patented siloxanes small enough to
penetrate most masonry pores up to ¼ inch or more. These special
siloxanes form strong bonds with the silica in masonry and concrete.
Because of this bonding process, one application of ChimneySaver
provides up to ten times the water repellent protection of typical
sealers.
100% Breathable
Moisture from a variety of sources is always present in
masonry and concrete. Sealers and silicone coatings form a water
resistant surface film which traps water vapors. If these vapors
cannot escape, they will contribute to spalling, scalling,
deterioration, and freeze-thaw damage. ChimneySaver is 100% vapor
permeable - a non film-forming water repellent that penetrates and
lines masonry pores. ChimneySaver offers the best protection because
it releases water vapors and effectively reduces water absorption.
Superior Value
The superior value and added benefits of protecting your
masonry with ChimneySaver® are obvious when comparisons are made
with popular retail brands of water sealers.
Long-Term Protection
ChimneySaver is an investment in long-term protection that
will help prevent expensive reconstruction. No water repellent,
however, is a substitute for good construction and workmanship. The
first step in preventing water damage is to make necessary repairs
to structural cracks, damaged crowns, flashings, deteriorated
bricks, and mortar joints. The second step is to protect porous
masonry from further water penetration by applying ChimneySaver
water repellent. Protection is especially needed when a new chimney
liner has been installed. If repairs and preventive measures are not
taken, the old chimney will continue to deteriorate around the new
liner.
Use On All Masonry Surfaces
Not just for chimneys, ChimneySaver® water repellent is the
ideal choice for protecting all residential and commercial
above-grade masonry. ChimneySaver is the best solution for a variety
of exterior masonry applications including, patios, walkways, pool
decks, and wall systems.
| 
